!
12
4.
Match the pin-1 corners and insert the Celeron processor into
the socket. No force is required and the processor should drop
into place freely.
5.
Swing the locking lever down and hook it under the catch on
the side of the socket. This locks the Celeron processor in the
socket.
6.
Locate the jumper JP4. Use this jumper to select if you have
installed a Slot-1 processor or a Socket-370 processor. The
jumper settings are illustrated below.
7.
If the Celeron processor is installed with a cooling fan
assembly, connect the cable from the fan to the CPU fan power
connector FAN1.
Install Memory
The mainboard has three DIMM slots which can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard.
For this mainboard, you must use 168-pin, 3.3V memory modules
installed with SDRAM memory chips. If you are using a processor
Selects a Slot-1
processor
Selects a Socket-370
processor
1
JP4
1
JP4
DIMM1
DIMM2
DIMM3
