41
4. The system will ask you to confirm the new password by asking you
to type it in a second time. Carefully type the password again and
press
Enter
, or just press
Enter
if you are deleting a password that
is already installed.
5. If you typed the password correctly, the password will be installed.
IDE HDD Auto Detection Option
This item automatically detects and installs any hard disk drives installed
on the primary and secondary IDE channel. Most modern drives can be
detected. If you are using a very old drive that can’t be detected, you can
install it manually using the Standard CMOS Setup option.
Setup will check for two devices on the primary IDE channel and then
two devices on the secondary IDE channel. At each device, the system
will flash an
N
in the dialog box. Press
Enter
to skip the device and
proceed to the next device. Press
Y
, then
Enter
to tell the system to
auto-detect the device.
Save And Exit Setup Option
Highlight this item and press
Enter
to save the changes that you have
made in the setup utility and exit the setup program. When the
Save and
Exit
dialog box appears, press
Y
to save and exit, or press
N
to return to
the setup main menu.
Exit Without Saving Option
Highlight this item and press
Enter
to discard any changes that you have
made in the setup utility and exit the setup program. When the
Exit
Without Saving
dialog box appears, press
Y
to discard changes and exit,
or press
N
to return to the setup main menu.
