17
J1: Fax/modem Extension Bracket
The fax/modem extension bracket is supplied with this mainboard.
1. Locate the J1 fax/modem connector on the mainboard.
2. Remove the expansion slot blanking plate from the system chassis
that is adjacent to the fax/modem connector.
3. Install the fax/modem extension bracket on to the J1 connector as
shown below. The RJ11 Line and Telephone sockets on the bracket
are positioned in the expansion slot with the removed blanking plate.
Line and Tel
RJ11 sockets
Fax/modem
extension bracket
J1
fax/modem
connector
