MS6261 User’s Manual
Video Off Option
Choose Always On, Suspend -> Off(default), Susp,
Stby -> Off, or All Modes-> Off.
Always On: Monitor will remain ON during the Power
Saving Mode.
Susp-> Off: Monitor blanked when the system enters
the Suspend Mode.
Susp, Stby-> Off: Monitor blanked when the system
enters either Suspend or Standby mode.
All Modes -> Off: Monitor blanked when the system
enter any kind of Power Saving Mode.
Video Off Method
Choose Blank, DPMS (default), or V/H Sync+Blank.
V/H SYNC+Blank: This option causes
the system to turn off the vertical
and horizontal synchronization
ports, and, write blanks to the
video buffer.
Blank Screen: This option only writes
blanks to the video buffer.
DPMS: Select this option only if your
monitor supports the Display
Power Management Signaling
(DPMS) standard.
HDD Power Down
When the set time has elapsed, the BIOS
sends a command to the HDD to power
down and this function has no effect on
SCSI devices.
Doze Mode
This option sets the CPU speed down to
33 MHz to conserve power.
Standby Mode
Standby Mode turns off the VGA monitor,
choose a mode for the different timers.
Suspend Mode
Suspend Mode turns off the CPU, thus
saving the energy of the systems.
MS6261 User’s Manual
Choose Disabled, Instant-Off (default), or Delay 4sec
-Off.
Instant-Off: The system will be powered
off instantly if uses the
power off switch to turn off
the computer.
Delay 4sec-Off: The system will not be
powered off after 4
seconds when turns off
the system.
Choose Enabled (default) or Disabled.
Enabled: If the power is suddenly
discontinued, the system will freeze and the system
will be powered back up by the ATX power supply
when the power is returned.
3. Press <ESC> and follow the screen instructions to save or disregard your
settings.
PnP/PCI Configuration Setup
PnP/PCI Configuration Setup configures the PCI bus slots. Run the PnP/PCI
Configuration Setup as follows:
1. Choose “PNP/PCI CONFIGURATION SETUP”from the Main Menu and a
screen depicted in Figure 3-6 will appear.
Figure 3-6. PnP/PCI Configuration Setup Screen
