MS6261 User’s Manual
FAN1, FAN2-Fan Connectors
CN4, CN5-LAN Wake-Up Connectors
These two connectors has the same function and the difference is that they are
designed for different cables
Note: LAN Wake-Up requires 5V stand-by voltage > 600mA for the ATX power.
MS6261 User’s Manual
COM1/COM2-Serial Port Connectors
This mainboard provides two 9 pin D-sub serial port connectors,COM1 and COM2.
FDD-Floppy Drive Connector
This mainboard has a 2 x 17-pin floppy drive connector.
USB-USB Connector
Attach the USB cables to THIS 8-pin connector to provide a connection between
USB devices and the system.
IDE1/IDE2-Primary/Secondary IDE Connectors
This mainboard has a 32-bit Enhanced PCI IDE Controller that provides two
connectors, IDE1 (primary) and IDE2 (secondary).
LPT-Printer Connector
Connect this jumper to the printer.
CN1-PS/2 Mouse Connector
CN3-Keyboard Connector
A six-pin female PS/2 keyboard connector and a six-pin female PS/2 mouse
connector are located at the rear of the board. Plug the
keyboard/mouse jacks into these connectors.
2.5 Running the System
After completing all the settings before running the system, you need to push the
ATX power button so that the system will work.
