Matrox Vio, Installation And Hardware Reference

Page: 13 / 60

12 Chapter 1: Introduction
Essentials for getting started
To begin using Matrox Vio Duo, you need the following:
• An available PCIe slot with four or more lanes. In addition, if installing the
expanded video input adapter board, an available slot to fasten it onto the chassis.
• Microsoft Windows operating system (consult the software package for supported
environments and computer memory/storage requirements).
• Processor with an Intel 32-bit architecture (IA32) or equivalent. Please refer to
the Matrox Imaging website for information on compatible chipsets.
• A CD drive, and a hard disk or network drive on which to install the Matrox Vio
Duo software.
• A proper power supply. Refer to the Electrical specifications section of Appendix B:
Technical information .
Inspecting the Matrox Vio Duo package
You should check the contents of your Matrox Vio Duo package when you first
open it. If something is missing or damaged, contact your Matrox representative.
Standard items
You should receive the following items:
• The Matrox Vio Duo board.
• An expanded video input adapter board.