36
1) This section will help with diagnosing problems with the integrated screen TV for the Matrix U7xe-01 Bike.
2) The TV should have power whenever the unit is powered up. If the TV will not power up when the power button is pressed:
a) Press ENTER, 3, 0, 0, 1, ENTER on the upper number keypad. Press TEST on the display. Check to make sure that it says INCLUDE
POWER next to the TV Keypad option. If it is excluded, change to include power and retry the TV power.
b) If the TV Keypad option is correct and the TV still will not power up, replace the console.
3) For a fuzzy or unclear picture, see the TV programming instructions in Section 10.6. If the TV is still fuzzy or unclear after programming:
a) Check the coax connection at the entertainment port (Figure A).
b) Remove the 4 screws holding the console to the console mast and check the coax connection at the console (Figure B).
c) Move the coax cable to directly plug into the back of the console bypassing the entertainment port. If this resolves the issue, replace
the internal coax cable.
d) If plugging the coax cable into the back of the console does not resolve the issue, check the coax cable with a known working
television. If the coax cable is good, replace the console.
figURE A
figURE B
8.11 TRoUBlESHooTiNg - TV iSSUES
CHAPTER 8: TRoUBlESHooTiNg
Summary of Contents for u7xe-01
Page 1: ...U 7 x E 0 1 B i k e S E R V I C E M A N U A l ...
Page 2: ......
Page 31: ...27 8 1 Electrical Diagrams Chapter 8 Troubleshooting ...
Page 74: ...70 NOTES ...
