58
The Matrix U5x Bike is capable of accepting a 15" TV via a bracket. Follow the instructions below to install
the TV and bracket. Use the instructions in the Entertainment Owner's Manual to program the TV after
installation.
1) Turn off power and disconnect the power cord.
2) Remove the console from the Bike.
3) Remove the 4 screws holding the 2 halves of the console together and split the console (Figures A & B).
4) Peel up the existing lower overlay that says Target Heart Rate Zone on it (Figure C).
5) Unplug the old overlay from the UCB and remove it (Figure D).
6) Install the new Entertainment overlay onto the console in place of the old overlay (Figure E).
FIGURE B
FIGURE D
FIGURE C
FIGURE A
FIGURE E
10.6 TV BRACKET INSTALLATION - CONTINUED
CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
