12
6.1 USING ENGINEERING MODE
To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.
Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.
CODE
DEFAULT
OPTIONS
DESCRIPTION
Disable Errors
No
Yes or No
No - Shows A-C class error
codes. Yes - Shows only C class
error codes.
Speed Units
Mile
Mile or Kilometer
Set for Mile or Kilometer.
Machine Type
U5x
H5x, R5x, U5x, E5x-02 or E5x-03 Set the Upright bike as U5x.
Power Save Time
30 Seconds
30-60 Seconds
Power saving time for the self
powered frame.
Pause Time
30 Seconds
15 - 120 Seconds
For non self powered frames
only. Not used on this model.
Serial Number
N/A
N/A
Serial Number input is available
for both the Console and Frame.
Use the number keys and UP
/ DOWN LEVEL keys to enter
Engineering Mode. Due to the
limited LED characters, 2 layers
are used to enter the serial
number. First Layer:
- PPPPP V
- PPPPP is the product name.
- V is the version. If the
version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08,
09, 10).
- nnnnn is the actual serial
number.
Use the UP / DOWN LEVEL keys
to navigate the layers and the
number keys to input the serial
number. The product name is
dependent on the Machine Type
setting.
For example, the console
is EP90 with ver. B and the
manufactured date is 2011.08
with 98765. The frame is CB75
with ver. B and the manufactured
date is 2011.06 with 12345. Their
serial numbers are:
Console SN: EP90B 1rst layer,
110898765 2nd layer.
Frame SN: CB75B 1rst layer,
110612345 2nd layer.
Club ID
N/A
N/A
This sets the club ID for clubs
using Asset Management.
Sleep Time
Off
Off or On (1-30 Minutes)
If there is no use of the machine
over a period of time, the console
LEDs will turn off (go into sleep
mode).
Audio Source
Off
Off / TV / PC TV / Remote TV
Manual setting that sets which
outside TV will have audio
through the console audio ports.
CHAPTER 6: ENGINEERING MODE