Matrix R30, Assembly Instructions Manual

Page: 2 / 21

2 3
WARNING!
There are several areas during the assembly process that special attention
must be paid. It is very important to follow the assembly instructions correctly
and to make sure all parts are firmly tightened. If the assembly instructions are
not followed correctly, the equipment could have parts that are not tightened
and will seem loose and may cause irritating noises. To prevent damage to the
equipment, the assembly instructions must be reviewed and corrective actions
should be taken.
TOOLS INCLUDED:
F
Phillips Screwdriver
F
R30/R50: 6 mm Hex Wrench, 5 mm Hex Wrench, 4 mm Hex Wrench
F
U30/U50: 5 mm Hex Wrench, 4 mm Hex Wrench, 2.5 mm Hex Wrench, 8 mm Wrench
R30 / R50 PARTS INCLUDED:
F
1 Bike Frame
F
1 Console Mast
F
1 Handlebars
F
1 Top Cap Front Cover
F
1 Top Cap Rear Cover
F
1 Seat Frame Assembly
F
1 Seat Bottom
F
1 Water Bottle Holder
F
1 Mesh Seatback
F
1 Outside Cover (R30 only)
F
1 Inside Cover (R30 only)
F
1 Power Cord
F
1 Hardware Kit
Console sold separately
ASSEMBLY
Before proceeding, find your equipment’s serial number located on a barcode
sticker and enter it in the space provided below.
SERIAL NUMBER
MODEL NAME
F
R30
F
R50
F
U30
F
U50
MATRIX EXERCISE BIKE
* Use the information above when calling for service.
SERIAL NUMBER LOCATION
NEED HELP?
If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information
is located on the information card.
U30 / U50 PARTS INCLUDED:
F
1 Bike Frame
F
1 Seat
F
2 Console Mast
F
1 Handlebar
F
1 Handlebar Set
F
1 Bike Seat Bracket
F
1 Water Bottle Holder
F
1 Console Back Cover
F
1 Power Cord
F
1 Hardware Kit
Console sold separately
3 ENGLISH
15
FRANÇAIS
27 ESPAÑOL
UNPACKING
Unpack the equipment where you will be
using it. Place the carton on a level flat
surface. It is recommended that you place
a protective covering on your floor. Never
open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts
are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this off. If you have difficulty,
a light application of lithium grease is recommended.
ENGLISH
MX16_AG_Bikes_ENG_FRE_SPE_r1_1.indd 2-3 3/10/16 2:03 PM