Omni-Flow 520
5
No.
Name
Description
1
Paper separator adjusting
dial
Turn the dial clockwise when feed table gets stuck or feeding
thicker paper. Turn the dial anticlockwise when double feeding.
2
Blowing adjusting dial
Turn the dial clockwise to weaken the blowing when feeding
thinner paper. Turn the dial anticlockwise to strengthen the
blowing when paper is not separating.
3
Speed adjusting dial
Turn the dial clockwise to increase the speed while turn the
speed dial anticlockwise to slow down.
4
LCD screen
Display
5
Key panel
Input data or orders.
6
Emergency switch
Cut off the power in emergency.
7
Power switch
Turn on or off.
8
Reset button
1.We can press the pause button and the reset button to reset
free when feeding table get stuck on the top and shows elevator
error
；
2. Press the start button and the reset button to reset
when feeding table gets stuck on the bottom and gives elevator
error.
9
Power socket
（
AC220V-240V,50/60Hz
）
10
Feeding table extension
board
Can be used for longer paper.
11
Feeding table
Place the paper.
12
Feeding side guides
Hold the paper.
13
Back stop guide
Hold the paper and prevent the paper from blowing back way.
14
Paper feeding height
adjusting shaft
Adjust the distance between the paper and suction belt.
