Omni-Flow 520
2
2 Safety
2.1 Environment
Temperature
：
10
℃
to 35
℃
Humidity
：
30% to 70%
Altitude
：
Below elevation 1000m
Ensure there are no corrosiveness gas, flammable gas, oil mist and so on in room.
2.2 Do’s and Don’ts
Do
-Read this manual and fully understand before the operation.
Do
-Check the
plug
and
system voltage and frequency
to your main
supply, and that the socket has a correct working earth lead for this
single insulated system.
Do
make sure all
s
afety co
vers
are in place. The top covers have
an interlock switch which will disable the unit if removed.
Do
contact the local maintenance center before you are about to move
the system.
Do
disconnect the power before cleaning the inner side.
Do
unplug the cord if not using the system for a long while.
Don’t
install the system on an unstable ground.
Don’t
operate with wet hands, especially plugging or unplugging the cord
Don’t
operate with long, loose hair, loose fitting clothes or put your
fingers into the creasing unit nip, whilst in operation.
Don’t
place any receptacles with any liquid on any surface of system.
