www.szmatrix.com
4
Calibration and calibration statement
The company specifically declares that the equipment listed in this manual fully complies with the
specifications and characteristics stated in the company's technical specifications. This instrument
has been verified by our company before leaving the factory. The verification procedures and
steps are in compliance with the specifications and standards of the Electronic Inspection Center.
Product quality assurance
The company guarantees that the new products manufactured by the company have undergone
strict quality confirmation. At the same time, it is guaranteed that within one year of leaving the
factory, if there is any construction defect or part failure of the product, the company is
responsible for repairing it for free. However, if the user changes the circuit, function, or repairs
the instrument and parts or the outer box is damaged, the company will not provide free warranty
service. If all the ground wires are not properly connected in accordance with the regulations or
the machine is not operated in accordance with safety regulations and abnormal conditions occur,
our company will not provide free warranty service. This warranty does not include accessories
that are not produced by our company, such as the accessories of this instrument. During the
one-year warranty period, please return the faulty unit to the maintenance center of our company
or the dealer designated by our company, and the company will repair it properly. If the unit fails
under abnormal use, human negligence, or non-human control, such as earthquake, flood, riot, or
fire and other non-human control factors, the company will not provide free warranty service.
(The company follows the sustainable development strategy and reserves the right to improve the
contents of this manual without prior notice)
