The max voltage you set should be within the range of 0V to the maximum rated
voltage.You can edit this value using the
,
keys or via numerical key pad followed by
Enter
.The default setting is the maximum rated voltage for each channel.
Out Timer
This item sets the output timer for channel 1 Channel 2.The range is 0.1~99999.9S.If you enable
this function,and the output state of all channels is on,the timer will start counting down
immediately.Once the timer expires(count down from set value to zero) the output of the
assigned channel will turn off.To disable the timer,set the output time to zero.Default
setting is 0 seconds.
Comb
This item configures the instrument connection mode.
Off
”Off” means that each channel operates independently. When set successfully, front
panel will display “Remove success!”
Series (Series mode)
This function configures the instrument for series operation of CH1 and CH2.Press
Esc
button to confirm your set.And press
to quit the operation.
When enable series connection mode,the front panel will indicate
“
Series success!” and
escape this screen after 2S.
Front display as follows in condition of output off and meter state.
Parallel (Parallel mode)
This function configures the instrument for parallel operations of CH1 and CH2.
. Press button to confirm your set, and press
Esc
to quit t
USER MANUAL
28
the operation
