MSC-CP32X1E Product Manual
Command
Description
PSub PRESET, DEST
Remove any existing connection to DEST in PRESET for any level.
PSub PRESET, DEST, LEVEL
Remove any existing connection to DEST/LEVEL in PRESET.
Example
>PSub 1,2
>PSub 1,3,2
>
The first command removes any connection to Destination 2 in Preset 1. The second command removes any
connection to Destination 3/Level 2 on Preset 1.
3.35 PView Command
Routers and MSC-GCP2U32 only
View presets. Displays the content of one or all presets.
The format of the returned output is “1:S1[,S2] 2:S1[,S2] ...” where the 1: and 2: are incrementing destination
values, followed by one or more source values (depending on the number of system levels).
Special source values
•
'-' indicates “No Change”, which causes no changes to the given Destination/Level.
•
0 indicates “Mute”
Command
Description
PView
Display all presets.
PView PRESET
Display a single PRESET.
Example on a 16x4 system with 2 levels
>PView 1
1:1,1 2:2,2 3:6,7 4:0,-
>
The above example shows that Preset 1 would cause Destination 1 to be connected to Source 1 for both levels,
Destination 2 to be connected to Source 2 for both levels, Destination 3 to be connected to Source 6 for Level 1
and Source 7 for Level 2 (break away) and Destination 4 to be Muted for Level 1 and “No Change” would be
made for Level 2.
3.36 Reboot Command
Instructs the system to reboot, which is done after a brief delay.
3.37 ReclkDis Command
Routers only - Protocol Version: 2.1
Page 33 of 48
Copyright © 2013-2015 Matrix Switch Corporation
