Matrix Fitness T1X-03AC, Service Manual

Page: 71 / 76

68
10.4 TV BRACKET INSTALLATION INSTRUCTIONS
CHAPTER 10: TREADMILL SPECIFICATIONS AND ASSEMBLY GUIDE
The T1x-03 is capable of accepting an add on 15" TV via a bracket. Use the instructions below to install
the bracket to the treadmill. Use the TV Owner's Guide to program the TV after installation.
1. Turn off power and remove the power cord.
2. Remove the console as shown in Section 9.12.
3. Remove the console back cover.
4. Unplug and remove the lower keypad / overlay from the console.
5. Install a the new entertainment keypad / overlay from the TV bracket kit (FIgure A).
6. Plug the new keypad / overlay ribbon cable into the UCB (Figure B).
7. Remove the existing head phone jack cover (Figure C).
8. Assemble the new head phone jack and wire to the new cover (Figure D), and install the new head phone jack / cover / wire to the console
(Figure E). Plug the head phone jack wire into the 4 pin wire coming up the console mast (Figure F).
FIGURE B FIGURE A
FIGURE D
FIGURE F FIGURE E
FIGURE C