Matica Lamination Module
MC-L2 User Manual
37
1. Press
‘MENU’
to enter the menu mode.
-Film Position (Start POS set)
Function :
Set the position of film and card for lamination.
- It can be set between -1.0mm ~+1.5mm +/- increments of 0.1mm.
From the direction of inserting the card, it moves back by ‘– (L)‘ value and
forward by ‘+(R)’.
2. Press the Menu Navigation Button to select
‘3. Start POS set’
and press
‘OK’
.
3. Use the Menu Navigation Button to adjust the position to laminate.
(It can be set between -1.0mm ~+1.5mm +/- increments of 0.1mm.)
As -(L) is getting up, the film will
be moved to the left.
As +(R) is getting up, the film will
be moved to the right.
the direction of -(L) value
the direction of +(R) value
UP 500 / LO 500
W30 / READY
2019.07.29(V0XX)
