Operator's Manual
multipli 35
Friction Feeder F35
20
Mathias Bäuerle GmbH
Fanning the Paper
Stack
Proceed as follows to fan out the paper stack before
placing it on the feed table:
•
Grip the left end of the paper stack with your
left hand and bend it towards the right.
•
Push down the right side of the stack with
your right hand.
•
While still holding down the right side
of the stack, release the left side, which
will snap back to its original position.
The stack is fanned out slightly.
Repeat this procedure once or twice
until the stack is fanned out properly.
Loading the Feed
Table
•
Slide the feeder back to rest
position (1).
•
Place the fanned out stack on the
feed table and slide it under the
feed- and infeed rollers.
1
2
•
Set the feeder to work position (2).
Position the stack in such a
way that the uppermost sheet
is located under the feed roller.
www.WhitakerBrothers.com
