Operation
Page 11
4
Operation
4.1
Operating instructions - sweeper
Using the turning handles, adjust the two support wheels in such a manner that the
sweeper roller makes a strip approximately
4 cm in width
(Picture 6) against the
ground. In this process use the markings to ensure that the two
support wheels
have
the same setting!
Note: Adjusting the sweeper roller too tight does not produce a better sweeping result.
Attention: Never store the sweeper on the broom.
For easier storage and mounting of the sweeper we recommend using the two supple-
mental parking support wheels that are available as special accessories.
If the sweeper is equipped with dirt collector and side broom, but is used without these
accessories, set the side broom drive to rotation.
Attention:
If this is not done the hydraulic oil can overheat.
4.2
Container - adjustment
Adjust the dirt collector in such a manner that the lower edge has at least a
ground
clearance of 4 cm
.
Attention:
Too high is better than too low.
Adjust the sweeper
carefully
if the ground is extremely uneven!
Depending on the position of the dirt collector lift cylinder on the rear side (pos.1) must
be positioned in the same height position of the 4 bores as the dirt collector.
Picture 6
Height scale
Parking
supports
4 cm
Pos. 1
Picture 7
