Operation
Page 8
3.3
Attachment of a SWE-HY 150
Plug the two hydraulic lines (flow and return) for the sweeper drive into the hydraulic
sockets located on the tractor.
For machines that are equipped with a hydraulic
swivel device
plug the two hydraulic
hoses into the hydraulic sockets on the tractor provided for this purpose.
Ensure that the plug-in couplings are clean.
3.4
Mounting the dirt collector - SWE-HY 150
Mount the two attachment plates (collector receptacles) on both facing sides of the
sweeper, using 4 M 8 x 20 mm screws for each side.
Hook the dirt collector (for a new sweeper) into the lower bore of the collector recep-
tacles left and right with the two locking pins and secure with linch pins. Depending on
sweeper wear, use the other bores as described in the operating manual. Attach the hy-
draulic container dumping unit with the two linch pins (pos. 2). Couple the hydraulic
hoses in the hydraulic sockets provided for this purpose on the tractor.
Picture 2
Pos. 2
Pos. 1
