Operation
Page 17
4.2
Coupling and uncoupling implements
Note!
Comply with the axle loads specified by the tractor manufacturer.
1.
Drive the tractor forward in front of the implement.
2.
Lower the front power system hydraulically.
3.
Drive slowly toward the implement until the coupling triangle of the tractor is under
the coupling triangle of the implement.
4.
Slowly lift the front power system until the implement is slightly lifted.
5.
Secure the implement with the appropriate triangle locking mechanism. The trian-
gle locking mechanism depends on the type of implement.
4.3
Lowering safeguard for the front power system
Note!
Use the lowering safeguard for:
– Driving on roads
– Driving between work locations
– Performing cleaning and maintenance tasks
Fig. 20: Lowering safeguard, shown in unlocked position
6.
Lift the front power system.
7.
Remove the spring cotter pin on the arrest bolt of the lowering safeguard and slide
the lowering safeguard over the bolt. Then secure the lowering safeguard by insert-
ing the spring cotter pin. The Fig. below shows the locked lowering safeguard.
Lowering safeguard
Arrest bolt of the
lowering safeguard
Summary of Contents for FPS-LS J23/27
Page 21: ......
