Installation
Page 10
3.2.2
Mounting the front hydraulic extension kit
Fig. 7: Mounted front hydraulic kit
3.
Bolt the hydraulic system console onto the right side of the attachment bracket. To
do this, use the two screws M12 x 40 mm already available on the front power sys-
tem.
Fig. 8: Hose guide
4.
Now mount the hydraulic couplings on the console and lay out the hydraulic lines
to the connections of the control device.
3.2.3
Attachment of the control device
1.
Fasten the holder for the control device, as shown in Fig. 9, with the aid of the pro-
vided M8 screws behind the right rear tire, in the direction of travel. Fasten the
holder for the control device with the two available M12 screws. Drill a hole with M8
thread, as shown in Fig. 10.
Black (lower the front power system)
Green (lift the front power system)
Blue (pivot to the right)
Red (pivot to the left)
Summary of Contents for FPS-LS J23/27
Page 21: ......
