Installation
Page 14
3.4
Mounting the universal joint shaft guard
(Optionally available, article no. 131 7239)
Fig. 15: Rear universal joint shaft guard holder
1.
Fasten the rear universal joint shaft guard holder shown in Fig. 15 below the mid-
mount PTO shaft on the tapped bores that are already available.
2.
Next, mount the front universal joint shaft guard holder on the drive shaft. To do
this, use the fastening screws of the drive shaft
Fig. 16: Front universal joint shaft guard holder
3.
Guide the universal joint shaft into the black protective tube and connect the front
PTO shaft with the mid-mount PTO shaft.
4.
In the front area the protective tube is fastened on the universal joint shaft guard
holder with the screws shown in the Fig. below.
Fastening points
Summary of Contents for FPS-LS J23/27
Page 21: ......