background image

TSB700A 4 03/18/20

TSB700A 700 LBS. TRANSVERSE SUPPORT BAR

PREVENTIVE MAINTENANCE

 

     

         Failure to follow the Preventive Maintenance may result in serious injury or death,

 

     

         and/or property damage.

1.  Always store the device in a well protected area where it will not be exposed to inclement weather, corrosive vapors,
 

abrasive dust, or any other harmful elements. The device must be cleaned of water, snow, sand, grit, oil, grease and

 

other foreign matter before using.  

2.  Every device owner is responsible for keeping the device labels clean and readable. Use a mild soap solution to wash
 

external surfaces of the device. Contact Matco for a replacement label if the device's label is not readable.

INSPECTION

 

     

         Failure to follow the Inspection may result in serious injury or death,

 

     

         and/or property damage.

Visual inspection should be made before each use of the engine support bar, checking for damaged, loose or missing 
parts. Each engine support bar must be inspected by a manufacturer’s repair facility immediately if subjected to an 
abnormal load or shock. Any engine support bar which appears to be damaged in any way, is found to be badly worn, or 
operates abnormally 

MUST BE REMOVED FROM SERVICE

 until necessary repairs are made by a manufacturer’s  

authorized repair facility. It is recommended that an annual inspection of the device be made by a manufacturer’s 
authorized repair facility and that any defective parts, decals or warning labels be replaced with manufacturer’s specified 
parts. A list of authorized repair facilities is available from the manufacturer.

WARNING

WARNING

WARRANTY NOTICE

Hydraulic Warranty Policy

Matco® shop equipment and tools, excluding accessories, are warranted against defects in materials or workmanship for a 
period of 1 year from original purchase. We will repair or replace at our option any defective part or unit which proves to be 
defective in material or workmanship within this warranty plan. This warranty does not cover damage to equipment or tools 
arising from alteration, abuse or misuse, and does not cover any repairs or replacement made by anyone other than Matco 
or its authorized service centers.
The foregoing obligation is Matco Tools sole liability under this or any implied warranty and under no circumstances shall 
we be liable for any incidental or consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation 
or exclusion may not apply to you.
Return equipment or parts to Matco Tools, or an authorized service center, transportation prepaid. Be certain to include 
your name and address, evidence of the purchase date, and description of the suspected defect.
If you have any questions about warranty service, please write to Matco Tools, Stow, OH 44224. This warranty gives you 
specific legal rights and you may also have other rights which vary from state to state.

Summary of Contents for TSB700A














Reviews: