Page of 45
1812367-12
19
OPERATING INSTRUCTIONS
High voltage danger from power source! Consult a qualified electrician for proper
installation of receptacle. This welder must be grounded while in use to protect the
operator from electrical shock.
Do not remove grounding prong or alter the plug in any way. Use only the supplied
adapter between the plasma cutter's power cord and the power source receptacle. Make
sure the POWER switch is
OFF when connecting your welder’s power cord directly to a
properly grounded 230 VAC, 60 HZ, Single Phase, 50 Amp input power supply. Or, when
using the supplied 120V adapter, connect the 120V Adapter to a properly grounded 120V,
20 Amp input power supply.
1. UNDERSTANDING THE FRONT PANEL
Reference
Description
1
Home/Start Button
2
Previous Screen Button
3
Voltage Control Knob
4
Multi-Function Adjustment/Selection Knob
5
Wire Job Button
6
Gas Purge Button
7
LCD Display
6
5
4
1
2
3
7