MCL16LED 3 11/26/14
MCL16LED 16V LED FLASHLIGHT
FLASHLIGHT OPERATION
Installing Or Removing Battery Pack
(See Fig. 1, Fig. 2)
1 . Your new battery pack is not
fully charged . You may need
to charge it before use .
2 . Make sure the switch is in the
"off" position before insertion/
removal of a battery pack .
3 . To remove a battery pack, depress
both tabs on either side of the
battery and pull downward .
4 . To insert a battery pack, align the
battery with the light housing and
push battery inward until click
indicating battery is fully installed .
Charging The Battery Pack
(See Fig.3)
1 . Battery may not charge when
it is above a certain preset
temperature limit . Allow
temperature of battery to
cool before charging .
2 . The charge process will take less
than one hour .
3 . After charging, unplug the charger
from the power source and stow
away in a safe place .
Light Operation
The cordless light is intended to illuminate a limited work area .
For replacement of LED, return to an authorized Matco
Service Center .
SAVE THESE INSTRUCTIONS!
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product replace strict
adherence to cordless product safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious personal
injury
.
1 . Hold light by insulated gripping surfaces when performing an
operation where the tool or accessory may contact hidden
wiring . Contact with a “live” wire will also make exposed
metal parts of the tool “live” and shock the operator .
2 . Be aware that this light is always in operating condition,
because it does not have to be plugged into an electrical
outlet .
3 . Always be sure you have firm footing .
4 . Be sure no one is below when using the tool in high locations .
5 . Hold the tool firmly and use both hands .
6 . Keep hands and hair away from rotating parts .
7 . Do not leave the tool running . Do not force light to stay in
the “on” position . Operate the light only when hand-held .
8 . Do not touch the light, accessory or the workpiece
immediately after operation; they may be extremely hot
and could burn your skin .
9 . Some material contains chemicals which may be toxic .
Take caution to prevent working dust inhalation and skin
contact . Follow material supplier safety data .
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
Fig. 1
Fig. 2
Fig. 3
