background image

MCL16LED 2 11/26/14

MCL16LED 16V LED FLASHLIGHT

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.

WARNING

SAVE THESE INSTRUCTIONS! 

GENERAL SAFETY INFORMATION (FOR 

ALL BATTERY OPERATED TOOLS) 

WARNING:

 

Read and understand all instructions. Failure to 

follow all instructions listed below, may result in electric 
shock, fire, explosion and/or serious personal injury. It is  
the responsibility of the owner to make sure all personnel  
read this manual prior to using the device.  It is also the 
responsibility of the device owner to keep this manual  
intact and in a convenient location for all to see and read.   
If the manual or product labels are lost or not legible,  
contact Matco Tools for replacements. If the operator is  
not fluent in English, the product and safety instructions  
shall be read and discussed with the operator in the  
operator's native language by the purchaser/owner or  
his designee, making sure that the operator comprehends  
its contents.

Work Area Safety 

1 .   Keep your work area clean and well lit . Cluttered benches and  
 

dark areas invite accidents . 

2 .   Do not operate lights in explosive atmospheres, such as in  
 

the presence of flammable liquids, gases, or dust . Lights  

 

create sparks which may ignite the dust or fumes . 

3 .   Keep bystanders, children, and visitors away while operating  
 

a light . Distractions can cause you to lose control and  

 

 

endanger others .  

Electrical Safety 

4 .   A battery operated light with integral batteries or a separate  
 

battery pack must be recharged only with the specified  

 

charger for the battery . A charger that may be suitable for one  

 

type of battery may create a risk of fire when used with  

 

another battery . 

5 .   Use battery operated light only with specifically designated  
 

battery pack . Use of any other batteries may create a risk   

 

of fire .  

Personal Safety 

6 .   Stay alert, watch what you are doing, and use common sense  
 

when operating a light . Do not use light while tired or under  

 

the influence of drugs, alcohol, or medication . A moment of  

 

inattention while operating lights may result in serious  

 

personal injury . 

7 .  Dress properly . Do not wear loose clothing or jewelry . Contain  
 

long hair . Keep your hair, clothing, and gloves away from  

 

moving parts . Loose clothes, jewelry, or long hair can be  

 

caught in moving parts . 

8 .  Avoid accidental starting . Be sure switch is in the locked or  
 

"off" position before inserting battery pack . Carrying lights  

 

with your finger on the switch or inserting the battery pack  

 

into a light with the switch "on" invites accidents . 

9 .  Do not overreach . Keep proper footing and balance at all  

 

 

times . Proper footing and balance enable better control of    

 

the light in unexpected situations . 

10 .  Use safety equipment . Always wear eye protection . Dust  
 

mask, non-skid safety shoes, hard hat, or hearing protection  

 

must be used for appropriate conditions .   

Light Use and Care 

11 .  Use clamps or another practical way to secure and support  
 

the workpiece to a stable platform . Holding the work by hand  

 

or against your body is unstable and may lead to loss of  

 

 control . 
12 .  Disconnect battery pack from light or place the switch in the  
 

locked or "off" position before making any adjustments,  

 

 

changing accessories, or storing the light . Such preventive  

 

safety measures reduce the risk of starting the light  

 accidentally . 
13 .  Store idle lights out of reach of children and other untrained  
 

persons . Lights are dangerous in the hands of untrained  

 users . 
14 .  When battery pack is not in use, keep it away from other  
 

metal objects like: paper clips, coins, keys, nails, screws, or  

 

other small metal objects that can make a connection from  

 

one terminal to another . Shorting the battery terminals  

 

together may cause sparks, burns, or a fire . 

15 .  If damaged, have the light serviced before using . Many  
 

accidents are caused by poorly maintained lights . 

16 .  Use only accessories that are recommended by the  
 

manufacturer for your model . Accessories that may be  

 

suitable for one light may create a risk of injury when used  

 

on another light . 

17 .  Do not use (or modify) the tool for any other purpose than  
 

that for which it was designed without consulting the  

 

manufacturer's authorized representative .

18 . 

CAUTION:

 Magnetic forces can be harmful to personal 

 

property and equipment including cell phones, computers,  

 

diagnostic equipment and credit cards .

19 .  This product may contain one or more chemicals known to    
 

the State of California to cause cancer and birth defects or  

 

other reproductive harm . 

Wash hands thoroughly after  

 

handling.  

Service 

20 .  Light service must be performed only by the MATCO  
 

authorized service centers listed . Service or maintenance  

 

performed by unqualified personnel may result in a risk of  

 

injury . Repair by unqualified personnel, use of unauthorized  

 

parts, and failure to follow maintenance instructions may  

 

create a risk of shock or injury .  

Summary of Contents for MCL16LED




















Reviews: