14
MAXIMUS2.0
User's Manual
Fig. 5-4
5.4 User and Connector Registration
5.4.1 User registration
Tap the icon on the desktop to launch the application, a disclaimer
page will pop up on the window. Tap “I’ve read it”, and tap “LOGIN” to
enter the login interface of diagnosis software, as indicated in Fig. 5-5.
Fig. 5-3
5.2 Bluetooth Setting
Enter MAXIMUS2.0 Bluetooth setting screen (“Settings” -->
“WIRELESS & NETWORK” --> “Bluetooth”), slide the Bluetooth switch
to ON and MAXIMUS2.0 will start searching available Bluetooth
device, click the desired connector to pair and match.
By default, the Bluetooth name is 98419*****00 (where ***** stands for
5 digits.).
Note: In case no Bluetooth setting is done before diagnostic
software is launched, you can also configure it while using the
software. For details on Bluetooth connection, please refer to “Chapter
5.6 Start diagnosing”.
5.3 Diagnosis Flowchart
For new users, please follow the operation chart shown in Fig. 5-4 to
get familiar with and start using MAXIMUS2.0.