Using the FixAdvisor
™
VIEWING OEM ENHANCED DTCs
44 MD70
Chrysler/Jeep OEM Enhanced DTCs
When
OEM Enhanced
is selected from the System Menu (and the
manufacturer selected during the code retrieval procedure was Chrysler
or Jeep), the Chrysler Enhanced menu displays. You may view either
“ECM/PCM DTCs” or “Transmission DTCs.”
1.
Use the
UP
and
DOWN
buttons,
as necessary, to highlight the desired
option, then press the
ENTER
button.
Transmission DTCs
are not
sup-
ported on most Chrysler/Jeep ve-
hicles manufactured prior to 2002.
A “One moment please” message
displays while the FixAdvisor retrieves
the selected DTCs.
If the FixAdvisor fails to link to the
vehicle’s computer, a “Linking Failed”
message shows on the FixAdvisor’s
display.
-
Verify the ignition is ON, then press
the
POWER/LINK
button to
continue.
2.
To read the display:
Refer to DISPLAY FUNCTIONS on page 11 for a description
of LCD display elements.
A visible
icon indicates that the
FixAdvisor is being powered through the
vehicle’s DLC connector.
The upper right hand corner of the
display shows the number of the code
currently being displayed, the total
number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are shown
in the lower section of the LCD display.
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
and
buttons, as necessary,
to view the additional information.
