15
6. TECHNICAL DATA
Model
Weight
Dimensions
width x depth x
height
Colours
Rope
Air access
adjustment
Juno lamp
25 kg
46 × 46 × 138 cm Corten / Black natural / white
automatic
Nexo lamp
16 kg
37 × 37 × 129 cm Corten / Black
-
automatic
7. USE
CAUTION!
The lamp may be started only after completing its installation. Do not fill-up the fuel
when the lamp is operating. Do not light up the equipment when it is hot. The com-
bustion container may be hot even for one hour after extinguishing the fire. Before
filling-up the fuel, check the combustion container whether there are any leakages.
If the biofuel is spilled, wipe out the surface which contacted the fluid immediately
with a paper towel.
1. Remove the glass lampshade (Dwg. 2a).
2. Fill up the combustion container with gel (Dwg. 2b).
3. Light up the lamp with the use of long fireplace matches or a fireplace lighter.
4. Put the lampshade on (Dwg. 2d).
5. A proper colour and height of flame is achieved after about 10 minutes of burning.
During burning, it is necessary to keep a safe distance from the lamp (at least 1 m).
Dwg. 2
b
a
c
d
Lighting up the lamp
CAUTION!
A risk of burning. Pay utmost attention
when lighting up the lamp.
EN
