the plate through the opening in the cross. You can now
remove the lock and reach the battery compartment.
After changing the battery, carry out the installation process in
reverse order. Ensure that the rubber seal around the lock is in the
correct position.
Resetting a lock to factory settings
Variant 1
#Mastercode
·
88
·
Mastercode
·
·
Example: #11335577
·
88
·
11335577
·
·
Result: The lock was reset to factory settings.
Variant 2
Remove one battery (Read the section entitled “Replacing
batteries” to ind out how to reach the battery compartment)
Press and hold the 1 button, replace the battery, the Blue LED
will lash twice, release the 1 button. Within three seconds
press the 1 button three times. The Blue LED and the Red LED
will lash simultaneously. The lock will have reverted to the
factory settings and all other stored settings will be erased.
