Seite 18
PROBLEM SOLUTIONS
ATTENTION – DANGER OF EXPLOSIONS !!!!
It is absolutly
prohibited
to use alu foil or similar to cover the burner, the pilot unit and the side walls over the
drawer.
Advice it will be damaged the range!
The above cause a wrong combustion and bad gasfire, it
over heat extremly
the unit and a bad function of
the burners will happened.
N°
PROBLEM
CAUSE
REMEDY
1
Pilot flame does not ignite
- Gas pipe pilot flame not closed
- Pilot flame clogged
- Pilot flame head clogged
- Pilot flame nozzle clogged
- Has the main gas pipe any
gas?
- Dismantle and clean
(evt. exchange)
- clean with steel brush
(evt. dismantle and clean)
- Pilot flame nozzle (C) replace
2
Burner flame is yellow
- Air regulation on nut required
- Burner is dirty
- Air regulation opening on nut
must be minimum 15 mm
- Take out, take apart, clean
3
Burner does not burn
- Gas cock is damaged
- control evt. exchange
4
Pilot flame burns, but after let
loose the security armature, the
flame does not stay
- Thermocouple dirty
- Thermocouple does not produce
voltage in millivolt
- Thermocouple is loose
- Thermocouple magnet on gas cock
defective
- clean with fine steel brush
- take apart and exchange
- again screw into position
- take apart and exchange
