MW8002
Rev 00.00
Page 16 of
25
©| AES Industrial Supplies Ltd | 2019 all rights reserved
Unauthorized reproduction of this manual is prohibited
.
INSTALLATION COMMISSIONING AND START-UP
Installation
For installation you must provide the electrical connection that can be made for reasons of practicality with
plug and socket 2 x 16 + T to be installed by the user.
To make the connection of the vacuum cleaner by grafting the filler hose for the conveyance of the fumes and
which in turn is connected to the element sensor.
It is advisable to protect the unit from moisture.
WARNINGS
Before installation, check the mains voltage.
Commissioning
It is recommended to include the use of the device by the following environmental conditions:
-
The ambient operating temperature of the machine is between -10 ° C and 60 ° C
-
The humidity of the indoor environment in which the work is carried out must be between 0% and 90%
Recommendations / Instructions:
-
The elimination/removal of any waste materials should be carried out according to the regulations
-
For cleaning or replacing the filters using the mask and protective gloves.
Description of manual controls
The activation of the purifier MW8002 is obtained manually by moving
the switch from position to position or
manual gear and automatically moving the switch to automatic operation. So it is prepared for operation in
automatic by inserting into the jack of the activator applied to the ground lead on the stroke of the welding arc
will close the circuit controlling the activation of the purifier. In the case that both purifiers are not activated to
check the efficiency of the respective fuses, checking any abnormalities of electrical character.
Before startup, check that the mains voltage is in accordance with what is set at installation time.
ATTENTION:
Both containers and metal structures connected to it should be thoroughly grounded as required by safety
regulations.
For this reason, it must be available near the equipment MW8002 an effective line of grounding.
The
test
is carried out at
the manufacturer’s premises, prior to shipment
.
Starting
After carrying out the above checks, turn on the mechanical purifier with the switch on the panel and connect
the collector element, connect the activator attacking him with a clamp to the ground wire from the generator
and engage into the jack located on the front door of the air cleaner tools.
FUNCTIONING
