MW 8100
PORTABLE WELDING FUME EXTRACTOR
MW 8100
2.3 Overall Dimensions
Picture 2 –
MW
8100
overall dimensions
3.
G
ENERAL
U
SE
A
ND
S
AFETY
D
IRECTIONS
•
Never leave packing material (such as foam polystyrene, rivets, carton, wood and so on) within
children reach, since it could be dangerous.
•
Before connecting the system, make sure that the connection point to the supply mains, implies
the presence of all necessary guards as foreseen by the Standards in force; also make sure that
the aforementioned connection point is compatible with the system supply mains.
•
This equipment is to be used solely according to the purposes for which it was expressly
realized. Any other kind of use is to be considered as improper and dangerous. We are not liable
for any damages due to an improper use of the equipment.
•
Before connecting the equipment, make sure that the ratings correspond to those of the supply
mains.
•
Do not carry out maintenance operations when the machine is running or connected to the
electric power source. During these operations make absolutely sure to disconnect the machine
from the power supply line.
•
If the machine does not operate properly DISCONNECT IT AND LET KNOW THAT IT’S
OUT OF ORDER. Apply to our After-Sale Service for repairing it and ask for original spare
parts.
The non-observance of what has been mentioned above could endanger the equipment safety.
•
We advise the use of this machine only to responsible and duly qualified staff in areas
inaccessible to children.
•
Should you decide not to use the equipment anymore, we recommend you to disable it by
disconnecting it from the supply mains and to dismantle it according to the regulations in force
in your Country.
•
In case of accidental fall or nasty bumps, do not use the machine and contact our After-Sale
Service immediately since the equipment safety could be endangered.
•
Work and keep the machine in a dry and sheltered place
•
Do not disperse used filters in the environment but deliver them to firms
specialized in removal according to regulations in force.
Dimension
Measure
A
280 mm
B
342 mm
C
534 mm
D
60 mm
Table 3 –
MW
8100
overall dimensions
Measure Dimension
A
280 mm
B
342 mm
C
534 mm
D
60 mm
