MW 8100
PORTABLE WELDING FUME EXTRACTOR
MW 8100
We thank you for having purchased one of the products of its range and invite you to read this
booklet carefully. In it you will find all the information necessary for proper use of the machine that
you have bought. For this reason, we recommend you read it throughout and to follow carefully the
instructions and warnings contained therein.
Make sure that you keep this booklet in a suitable clean and dry place so that it will remain
undamaged. We reserve the right to modify the content of this manual, without any prior notice and
without any obligations on its own part, to include any variations and improvements to the units
already supplied. The reproduction or translation of any part of this booklet without prior written
authorization from the manufacturer is strictly forbidden.
G
ENERAL
I
NDEX
:
GENERAL INDEX: _____________________________________________________________ 2
1. INTRODUCTION ____________________________________________________________ 3
2. TECHNICAL CHARACTERISTICS ____________________________________________ 3
2.1
T
ECHNICAL DATA
___________________________________________________________ 3
2.1.1 Highest Efficiency _______________________________________________________ 3
2.1.2 Low Noise Level ________________________________________________________ 3
2.1.3 Handiness _____________________________________________________________ 3
2.2
W
ORKING MODE
____________________________________________________________ 4
2.3
O
VERALL
D
IMENSIONS
_______________________________________________________ 5
3. GENERAL USE AND SAFETY DIRECTIONS ___________________________________ 5
3.1
U
SE
D
IRECTIONS
____________________________________________________________ 6
4. PRELIMINARY CHECKS AND INSTALLATION ________________________________ 6
5. MAINTENANCE _____________________________________________________________ 8
5.1
R
EPLACING THE
CARTRIDE
F
ILTER
______________________________________________ 8
5.2
R
EPLACING THE
F
ILTER WITH
A
CTIVATED
C
ARBONS
________________________________ 8
6. TROUBLES AND CURES _____________________________________________________ 9
7. WIRING DIAGRAM _________________________________________________________ 10
8. DESCRIPTION OF STICKERS _______________________________________________ 10
9. SPARE PARTS _____________________________________________________________ 11
10. CONFORMITY DECLARATION ____________________________________________ 12
