MW 8100
PORTABLE WELDING FUME EXTRACTOR
MW 8100
•
The use of the filtering unit for filtering and purifying fumes coming from
operations such as deburring, linishing, grinding and for extracting
inflammable vapours is forbidden
3.1 Use Directions
In order to use the machine properly proceed as follows:
1.
By means of its handle (part. 7, picture 1); place the machine near the welding fumes.
2.
By means of its magnetized base, place the nozzle where you must extract the fumes.
3.
Connect the power supply cable to the external plug on the machine (picture 3);
4.
Connect the power supply cable to the main electric grid (after making sure that the ratings
written in this booklet and on the machine correspond to those of the supply mains);
5.
Press the starting button placed on the machine side. When it is in the position 1, a light
inside the button will show that the machine is in its ON position (picture 3);
6.
When suction is not needed any more press again the button (position 0). The light in the
button will die out (picture 3).
7.
Disconnect the power supply cable from the power source and from the external plug. Place
the machine where it can not cause problems to or hinder workers during their usual activities.
P
ICTURE
3
Do not carry out any maintenance procedures when
the equipment is connected to the supply mains.
During this phase, we recommend you disconnect it.
Machine On/Off
Button
Plug for connecting
electric cable
Fuse
