16
Mass Sine Ultra
– Installation Manual Multiple Units
Three-phase configuration with MasterAdjust
15. Notice the
Cluster topology
and
Cluster state
. Topology monitors the size of the cluster (whether the selected number of
units is equal to the selected number of devices). State monitors the configuration state of the cluster.
Click the
Activate cluster
button to finish the cluster configuration. The Cluster state will change from "Incomplete" to
"Active".
16. In the device list, in the left pane of MasterAdjust, the L2 and L3 units will now be listed under the L1 unit.
5.7
Initial start-up
1. Switch all units off and on again.
2. Check that the units are working properly.
