background image

8

May 2004 / WHISPER 15 ULTRA / USA

INFORMATION

acid is produced which cannot be removed from

the skin. If signs of decomposition are evident, or

if in doubt, always wear disposable heavy duty

gloves.

2.2   TRANSPORT, LIFTING AND STORAGE

When  lifting the generating set avoid any

risk for personal injuries, do not stand un-

der the generating set.

Use soft slings to avoid damage.

On the engine are two  lifting eyes, only to be

used to take the generator out of the capsule. Do

not use to lift the set including the capsule and

certainly not including the steel foundation plate !

After transporting the generating set check for

damage before installation.

Long term storage can have detrimental effects

on engine and alternator. The engine should be

put through an engine preservation procedure.

(Refer to the maintenance chapter)

The alternator windings tend to condense. To mi-

nimise condensation, store the generating set in a

dry and warm storage area.

After removing the generating set from long term

storage perform an insulation check. (Refer to the

alternator maintenance paragraph for procedures)

While the battery is stored it should be recharge

every 12 weeks.

2.3 

THE WHISPER  15 ULTRA

2.3.1   Features

This generating set includes a diesel engine which is

connected by close coupling to an alternator in a sound

attenuated capsule. The set is mounted on  a steel base

frame and mounted securely on anti vibration mounting

pads to the capsule base. All cables and hoses are gui-

ded through the capsule’s sides. The set is not self con-

tained and is only operable after proper installation using

additional accessories and installation materials.  

Installation accessories are listed in the installation ma-

nual and are available through the supplier of the genera-

ting set. The full automatic Digital Control is based on

microprocessor technology. Several automatic start/stop

functions can be programmed and monitored. (refer to

Digital Diesel Control users manual)

2.3.2 Remote 

control

The full automatic remote control panel including 15 mtr

cable comes as standard with the Wisper 3,5.

2.3.3   Documentation

Included in the delivery is this users manual (number:

50200424) an installation manual (number: 50200261)

and an users manual for DDC (number 50200185).

Not included in the standard delivery but available as an

option are:

• Parts manual; number: 50200183

• Workshop manual;  number: 50200172

However in this manual there is a list of important parts

for maintenance and spare parts as well as a chapter on

maintenance and problem solving.

2.3.4 

Accessories included in the standard 

delivery

Expansion tank, hose and fittings

Special hoseconnector for measuring exhaust back 

pressure (Refer to paragraph 5.4.3)

Summary of Contents for 5 ULTRA





































Reviews: