18
4.8
INSTALLATION STEP-BY-STEP
1
Mark the position of the mounting spots by
using the mounting bracket. Then Fix the
mounting bracket to the wall.
2
Place the ChargeMaster over the mounting
bracket and then move it downwards until it is
suspended from the mounting bracket.
3
Open the
connection
compartment by
loosening the two
screws.
4
Fix the enclosure to the wall by fastening two
screws at the lower side of the enclosure as
well.
5
Connect the wiring to the screw terminals.
Fasten the cable with the cable clip.
6
Fit crimp-on ring terminals to the DC-cables.
Connect the DC-cabling of battery bank 1,
positive to +, negative to
– .
If needed repeat steps for output 2 and 3.
