Page 11
Parts List
24" x 48" FreeMo Module Kit
Qty description
1
Deck
2
End Plates w/ steel pin, bushing a & threaded inserts
2
Leg Pivot Blocks
2
Side Plates
1
Deck Brace - center
2
Deck Braces
1
Leg - #1
1
Leg - #2
1
Leg - #3
1
Leg - #4
4
End Leg Braces - Long
4
Front Leg Braces - Short
1
Hardware Pack (contains the following)
4
1/4-20 x 3" Carriage Bolt (adjustable foot)
2
1/4-20 x 2-3/4" Carriage Bolt (leg pivot)
2
1/4-20 x 2-1/4" Carriage Bolt (leg Pivot)
1
1/4-20 x 1-1/4" Carriage Bolt (leg bracing)
4
1/4" Flat Washer
4
1/4-20 ESNA Hex Lock Nut
1
1/4-20 Wing Nut
18
#10 x 1 FH Philips Wood Screw
30
#6-5/8 Flat Head Philips Wood Screw
2
Front Leg Brace Spacer (round wooden disk)
2
Leg Retainers
Tips for finishing your modules.
1. Before painting, seal wood with a sanding sealer. We recommend using Zinzer Shellac thinned
with denatured alcohol – one part shellac to one part alcohol. This can be easily and quickly
brushed on in a well ventilated area. It should be dry for sanding within 15 minutes. We do not
recommend sealing and painting the top surface of the module until after you have glued your
roadbed and any other object that you plan to glue to the deck.
2. Be careful to not get paint on the locating pins and bushings on the module end plates.
Summary of Contents for FreeMo Module Kit
Page 4: ...Page 4...
