Page 6
9. Attach bracing to Legs 1 & 2 - Locate two of the long leg braces and four #10 x 1” wood screws.
Attach first brace as shown, using pre-drilled holes in legs. Attach second brace with screws.
10. Attach Legs #3 & #4 - Locate Legs labeled 3 & 4 and the hardware shown. Install leg#3 in
corner marked 3. Install leg #4 in corner marked 4. Make sure the rounded corner on the end of the
leg is oriented toward the outside of the module as shown. Tighten the hex nut snug but not so
tight to keep the leg from pivoting.
Summary of Contents for FreeMo Module Kit
Page 4: ...Page 4...
