Page 5
7. Turn module assembly back on its deck. Locate and check the fit of the Leg Pivot Blocks. Apply
glue as shown and attach pivot blocks at each end with two #10 x 1-1/4” wood screws.
8. Attach Legs #1 & #2 - Locate Legs labeled 1 & 2 and the hardware shown. Install leg#1 in corner
marked 1. Install leg #2 in corner marked 2. Make sure the rounded corner on the end of the leg is
oriented toward the outside of the module as shown. Tighten the hex nut snug but not so tight to
keep the leg from pivoting.
Summary of Contents for FreeMo Module Kit
Page 4: ...Page 4...