7
OPERATING THE WORKLIGHT
Do not attempt to modify the worklight.
Check the worklight before each use. Do not use a worklight with worn or broken parts.
Always switch the worklight off before unplugging cord. AC only.
To reduce the risk of electric shock, do not connect or disconnect
when wet. When connecting multiple sets protect connection(s) from direct exposure to
rain and water. Do not allow connection(s) to become wet.
OPERATING THE ON/OFF SWITCH
Attach the light Y splitter plug to 120V power. The ON/OFF switch is located on the back of the work-
light. Press the switch to turn the worklight “ON” or “OFF.”
ADJUSTING THE WORKLIGHT BEAM
1. Use the handle to turn the worklight to the desired position.
(Fig. 6)
2. Use the directional shade panel to redirect the light or
change the shape of the light or the amount of the light
emitted from the worklight.
STORAGE
Worklights and tripod should be stored out of the reach of children in a safe dry location.
Close the directional shade panels to protect the worklight glass lens during storage.
NOTE: Lightly coat all screws with anti-corrosion oil to prevent rusting every six months.
TROUBLESHOOTING
If the worklight does not work:
Check that the worklight is plugged into a working outlet.
If using a worklight with a GFCI, press RESET button in case GFCI has been tripped.
Make sure that worklight has been switched ON.
FIGURE 6
