8
MAINTENANCE AND CLEANING
Do not clean worklight while it is hot! Unplug the worklight and allow
it to cool down before cleaning.
Use only mild soap and a damp cloth to clean the worklight. Never let any liquid get inside the
casing. Never immerse any part of the worklight in a liquid. Always keep the ventilation openings clear.
Never open the worklight case. Do not attempt to repair the worklight yourself.
Use only authorized replacement parts for your tool.
Equipment service must be performed only by qualified repair personnel using authorized replacement
parts. Service or maintenance by unqualified personnel could result in considerable risk of personal
injury. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when used on another tool.
If you must use an extension cord, be sure that the gauge is large enough to carry the amount of
current necessary for your power tool. If not, your tool may experience a loss of power, excessive
voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below).
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
CURRENT RATING IN AMPS CONDUCTOR SIZE IN A.W.G.
MORE THAN NOT MORE THAN 7.62
m 15.24
m 30.48
m 45.72
m
(25
ft.) (50
ft.) (100
ft.) (150
ft.)
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12 NOT RECOMMENDED
