Page 13
LED WORKLIGHTS (FIG. 9)
FIG. 9
Your router motor has 3 built-in worklights
located around the collet to provide high
visibility of the workpiece when cutting.
These lights are always “On” when the
toggle switch is in the “ON” position.
“LIVE TOOL INDICATOR” LIGHT
(FIG. 10)
FIG. 10
Live tool
indicator
Your router also has a “live tool indicator”
green light, located on the motor housing
top cap where the power cord enters the
motor housing. This green light is always
on when the router motor is plugged into a
power source.
TOGGLE “ON/OFF”
SWITCH (FIG. 8)
0
3/64
1/64
FIG. 8
Your router motor is turned “ON” and “OFF”
with the toggle switch located on the top
cap of the motor housing.
The left side of the toggle switch hood (as
you face it) is marked “I” and “ON” and the
right side (as you face it) is marked “O” and
“OFF.”
•
To turn the motor “ON”, push the toggle
switch to the left side marked “I” and
“ON.”
•
To turn the motor “OFF” push the
toggle switch to the right side marked
“O” and “OFF.”
Always hold the router and the cutter bit
away from the workpiece when turning
the toggle switch “On.” Only contact the
workpiece with the router and cutter bit
after the router has reached the full selected
speed. Only remove the router and cutter bit
from the workpiece after turning the router
motor “OFF” and after the cutter bit comes
to a complete stop.
SOFT START FEATURE
The soft start control minimizes torque
twist, customary in larger router motors, by
limiting the speed at which the motor starts.
This increases the motor’s life.
OPERATION
