14
ON/OFF SWITCH WITH LOCK OFF
– cont’d
3. When the tool starts, you can release
the lock-off switch while continuing to
press inward on the ON/OFF button.
The tool will continue to run.
4. To turn the tool OFF, remove your
thumb from the ON/OFF button.
NOTE:
Once the tool has stopped, you
must repeat steps 1 & 2 to turn it ON
again.
For safety reasons, the operator
must read the sections of this
Instruction Manual entitled
“GENERAL SAFETY WARNINGS”,
“POWER TOOL SAFETY”,
“SPECIFIC SAFETY RULES”,
“EXTENSION CORD SAFETY” and
“SYMBOLS” before using this palm
planer.
Verify the following every time the
palm planer is used:
1. Safety glasses, safety goggles,
or face shield is being worn.
2. Hearing protection and dust
mask are being worn.
3. The cutting blades are in good
condition, and are properly
tightened into the cylinder.
4. The power cord is clear of the
cutting blade path.
5. The workpiece is clear of any
foreign materials such as nails.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
ASSEMBLY AND OPERATING
Summary of Contents for 54-6621-8
Page 12: ...12 CONTENTS ...
Page 24: ...24 EXPLODED VIEW ...
