MasterCraft 54-2903-2, Owner'S Manual, Page: 23 / 37

23
DUAL LED WORKLIGHTS
Dual LED worklights (1) are located behind
the torque collar (2) (Fig. 17). The LED
switch button (3) is located below the LCD
panel on the top of the drill (Fig. 18).
1. To turn the LED lights ON, first press
the LCD display switch (5) once, then
press the LED switch (3) once. The
LED lights will turn OFF automatically
when the tool is not operated for
approximately 5 minutes.
2. To turn the LED lights OFF, press the
LED switch again.
LCD DISPLAY
This hammer drill is equipped with an LCD
panel (4) in the top of the drill housing
(Fig. 19).
1. To turn the display ON, press the
display button (5) once. To turn the
display OFF, press the display button
again.
2. The light icon (6) will become visible
when the LED worklights are turned
ON.
3. The battery icon (7) indicates the
amount of charge remaining in the
battery. Each charge bar displayed
indicates approximately 10% charge
remaining in the battery. A total of 10
charge bars indicates a fully charged
battery.
ASSEMBLY AND OPERATING
Fig. 18
Fig. 19
Fig. 17