MasterCraft 062-3408-6 Instruction Manual Download Page 19

headline bars

continuation tabs

notes

warnings

19

This Mastercraft product is guaranteed for a period of 

one (1) year

 from the date of original retail purchase, against 

defects in materials and workmanship.
Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase within 
the stated warranty period and if covered under this warranty, will be repaired or replaced (with the same model, or one 
of equal value or specification), at our option. We will bear the cost of any repair or replacement and any costs of labour 
relating thereto.

These warranties are subject to the following conditions and limitations :

a. a bill of sale verifying the purchase and purchase date must be provided;
b. this warranty will not apply to any product or part thereof which is worn or broken or which has become inoperative 

due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or maintenance (as outlined 
in the applicable owner’s manual or operating instructions) or which is being used for industrial, professional, 
commercial or rental purposes;

c. this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be supplied with 

the product which are expected to become inoperative or unusable after a reasonable period of use;

d. this warranty will not apply to routine maintenance and consumable items such as, but not limited to, tune-ups or 

adjustments;

e. this warranty will not apply where damage is caused by repairs made or attempted by others (i.e., persons not 

authorized by the manufacturer);

f.  this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished 

product (unless otherwise specified in writing);

g. this warranty will not apply to any product or part thereof if any part from another manufacturer is installed therein or 

any repairs or alterations have been made or attempted by unauthorized persons;

h. this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches, dents, 

paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; and

i.  this warranty will not apply to component parts sold by and identified as the product of another company, which shall 

be covered under the product manufacturer’s warranty, if any.

Additional Limitations

This warranty applies only to the original purchaser and may not be transferred. Neither the retailer not the manufacturer 
shall be liable for any other expense, loss or damage, including, without limitation, any indirect, incidental, consequential 
or exemplary damages arising in connection with the sale, use or inability to use this product.

Notice to Consumer

This warranty gives you specific legal rights, and you may have other rights, which may vary from province to province. 
The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim or exclude any 
statutory warranties set forth in any applicable provincial or federal legislation.

Made in China

Imported by 
Mastercraft Canada Toronto, Canada M4S 2B8

W

ARRANTY

Summary of Contents for 062-3408-6





















Reviews: