MasterCraft 058-813-2, Instruction Manual

Page: 20 / 29

MAINTENANCE
20
AIR
-
POWERED STAPLER 058
-
8132
-
2
Maintenance
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the air compressor before performing maintenance/
service, adjusting, clearing jams, reloading, and when it is not in use.
•
Repairs must be performed by a qualified service technician only. Failure to
comply will lead to serious injury or loss of life.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM SERVICE INTERVAL
Each Use or
every 2 Hrs
Monthly
As
Needed
General inspection
–
free movement
Trigger, spring,
safety mechanism
None X
In
-
depth inspection
Worn or broken
parts
X X
Replace worn or
broken parts
X
Lubrication See below
Pneumatic tool
oil
X
•
Lubrication: If the Air
-
powered Stapler and the
compressor are not equipped with an in
-
line
lubrication system, place up to 6 drops of
pneumatic tool oil into the air inlet before each
work day or after every 2 hours of continuous use,
based on the characteristics of the workpiece and
staples used.
MC-8132-11