MasterCraft 058-813-2, Instruction Manual

Page: 17 / 29

OPERA
TING INSTR
UCTIONS
17
AIR
-
POWERED STAPLER 058
-
8132
-
2
Firing modes
The Mastercraft
®
Air
-
powered Stapler is
equipped with a single sequential actuation
mode.
1. Press the safety stand (1) against the
workpiece (2)
(fig E)
.
2. Pull the trigger (1) to drive the staple
with the safety stand (2) pressed firmly
against the workpiece
(fig F)
.
3. If the safety stand remains pressed,
successive staples will fire each time the
trigger is pressed.
4. Test the driving depth using a sample
piece of wood before working on the
workpiece. If the staples are being
driven too deep or not deep enough,
adjust the regulator in order to provide
more or less air pressure, as required.
2
1
MC-8132-07
fig E
1
2
MC-8132-08
fig F